Thrust Ball Bearings Supplier In Mumbai | Sadguru International In Mumbai
Precautions for Proper Handling of Bearings
Since rolling bearings are high precision machine parts, they must be handled accordingly. Even if high-quality bearings are used, their expected performance cannot be achieved if they are not handled properly.
Maintenance often involves unusual work, non-routine tasks, and it is often performed in exceptional conditions, such as in confined spaces, for example.
Maintenance operations typically include both disassembly and reassembly, often involving complicated machinery. This can be associated with a greater risk of human error, increasing the accident risk.
Bearings are delicate enough to get damaged quickly. As such, it is very important that they are stored horizontally in a clean and dry environment with their packaging intact. Do not expose them to any airborne contaminants, as even a tiny speck of dirt can cause premature failure.
Never hammer or pound them, or apply a direct force on it or its outer ring, which can cause damage to the rolling elements, resulting in misalignment. The most important thing to remember is to never remove bearings from their packaging until ready for use.
For busy maintenance staff, bearings tend to take a back seat to other priorities until contamination occurs or a failed unit brings a line to a sudden halt. Unfortunately, the cost to remedy these situations often far exceeds the expense of investing in stronger bearing solutions that can avoid such troubles.
Perhaps the most basic determinant of proper bearing operation is choosing the right bearing design for the application as defined in the original equipment manufacturer (OEM) documentation.
The bearing must be able to handle the load that is being applied to it. For example, bearings requirements for belt-driven equipment are different from those for in-line equipment.
Dust and dirt, even if invisible to the naked eye, have harmful effects on bearings. It is necessary to prevent the entry of dust and dirt by keeping the bearings and their environment as clean as possible.
Manufacturing facilities collect dust and other contaminants. Despite the surroundings, it is crucial to establish a clean workspace prior to bearing installation.
This prevents harmful elements from contacting the bearing before it is commissioned. An oft-forgotten but common-sense tip is to keep the box containing the new bearing closed until it is ready for mounting to avoid any ingress of contaminants.
Today, most facilities minimize the spares they keep in their stores. Through predictive or preventive maintenance, these facilities can detect potential failure early enough to be able to correct, order, and replace bearings before a machine goes down. This just-in-time ordering means that machines and bearings do not need to sit on shelves.
Risk assessment – potential hazards have to be identified (e.g., dangerous substances, confined spaces, moving parts of machinery, chemical substances or dust in the air), and measures need to be developed to eliminate or minimize the risks.
A good strategy is to walk your facility with your inspection team and a trusted friction management expert to prioritize mission-critical bearings and communicate about possible issues.
Oftentimes, a specialist can recommend better ways to inspect hard-to-access bearings or can anticipate where corrosion is likely to occur, having seen the problem many times before.
Thrust Ball Bearings Supplier In Mumbai Contact | Sadguru International In Mumbai
Address: Ecstasy Bussiness Centre, Ground Floor, City of JOY Complex, JD Road, Mulund (West).
Telephone : 022 – 25690777
Mobile : +91 93239 29256
E-Mail : info@sadguruinternational.com | sadguruint8@gmail.com
Fax : 25640777